Vers le contenu des pages

Support de claviers/appareils de studio

  • Avec 3 niveaux
  • Hauteur du premier niveau réglable en 8 étapes
  • Hauteur du troisième niveau réglable de 590 mm par rapport au premier niveau
  • Réglage de la hauteur par vis de serrage
  • Hauteur réglable de 600 à 900 mm
  • Angle des deuxième et troisième niveaux réglable en 8 étapes
  • Stabilité supplémentaire pour les installations lourdes
  • Espacement entre les supports: 540 mm
  • Profondeur des supports du premier niveau: 470 mm
  • Profondeur des supports des deuxième et troisième niveaux: 350 mm
  • Poids admissible du premier niveau: 40 kg
  • Poids admissible des deuxième et troisième niveaux: 20 kg chacun
  • Dimensions d'installation (L x P x H): 910 x 630 x 1450 mm
  • Poids: 18 kg

Accessoires adaptés optionnels non fournis:

  • Référencé depuis Mai 2025
  • Numéro d'article 616521
  • Conditionnement (UVC) 1 Pièce(s)
  • Nombre de claviers 3
429 €
Tous les prix TVA incl. (TTC)
Disponible immédiatement
1

3 Évaluations des clients

5 / 5

Stabilité

Utilisation

Qualité de fabrication

3 Commentaires

L
Lionel-L 15.07.2025
Très belle facture, support très bien fini, solide et surtout très stable! Je recommande vivement !
Stabilité
Qualité de fabrication
Utilisation
0
0
Signaler l'évaluation

Signaler l'évaluation

google translate gb
Une erreur est malheureusement survenue, veuillez réessayer ultérieurement svp.
M
Buy once, cry once
MarcusAurelius68 01.09.2025
I’ve owned many stands over the years, from the aluminum A-frame stands through the Apex stand I’d gig with. I wanted to move to a 3 keyboard rig so I bought a K&M Spider Pro, which is great for 2 keyboards but not really 3. Then I saw the Blackpanthersystem Para Plus, and despite it being more expensive than most, decided to order it.

It’s substantial. Heavy. Well-constructed with German engineering. Most importantly, it holds 3 keyboards with the right spacing with no bouncing. I have a Nord Stage 4 on the bottom, Roland Jupiter X in the middle, and a Prophet Rev 2 on top.

On the middle tier the Jupiter is too deep and sticks out and I needed to remove the plastic stopper, but an extender is available. My only suggestion is that this should be standard or a replacement arm available that doesn’t need an extender. Otherwise, this should last me for years.
Stabilité
Qualité de fabrication
Utilisation
0
0
Signaler l'évaluation

Signaler l'évaluation