Vers le contenu des pages

Câble microphone/audio symétrique pour les applications de diffusion et live

  • Gaine extérieure sans halogène et résistante au froid
  • Blindage à double enroulement en cuivre exempt d'oxygène
  • 3x 0.20 mm²
  • Blindage contre les interférences HF
  • Câble pour la mise à la terre comme pour des platines vinyles par exemple
  • Référencé depuis Août 2010
  • Numéro d'article 251540
  • Conditionnement (UVC) 1 Mètre(s)
  • Couleur Noir
  • Section de câble 0,2 mm²
2,77 €
Tous les prix TVA incl. (TTC)
Remise sur la quantité
Prix pièce Vous économisez Quantité
2,77 € 1
2,59 € 6,5% 30
2,55 € 7,9% 100
Disponible immédiatement
1

25 Évaluations des clients

4.6 / 5

Qualité de fabrication

10 Commentaires

M
Très bon cable
Michel997 04.10.2012
Je l'utilise pour cabler tout mon pédalier et mes jacks de raccordement à l'ampli super cable solide et facile à plier.
Qualité de fabrication
1
0
Signaler l'évaluation

Signaler l'évaluation

D
Très bon câble
Dav777 29.07.2020
Utilisé pour faire une rallonge pour mon casque ; remplit parfaitement son rôle, aucun souffle ni atténuation de son.
Je recommande !
Qualité de fabrication
0
0
Signaler l'évaluation

Signaler l'évaluation

google translate gb
Une erreur est malheureusement survenue, veuillez réessayer ultérieurement svp.
l
Good quality cable that has issue when soldering with lead-free solder
leonlag 08.11.2025
The inner conductor insulation cannot withstand the temperatures used used to solder lead-free solder(300C). It's not that big of a deal when soldering the invidual wires since you can simply heat up the contact on the connector and then quickly dip the conductor into the molten solder. The issue is more noticeable when trying to solder the shield as that is obviously wound around the individual conductors and can sink quite a bit of head due to it's bigger diameter.

Soldering this with lead-free solder is definitely doable but I wouldn't buy this again for this reason and would rather look for something with silicone insulation around the conductors.
Qualité de fabrication
0
0
Signaler l'évaluation

Signaler l'évaluation

google translate gb
Une erreur est malheureusement survenue, veuillez réessayer ultérieurement svp.
PA
PAFT Audio 24.05.2025
Good quality and good sounding cable for independent 3 wire XLR plus additional shielding. The shield is very good quality. I measured the capacity for my 5 meter cables. The capacity between the active wires is about 370pF and the shield to active about 600pF. This gives about 1 degree phase error in 20kHz and the frequency start slight to roll off after the 70kHz range.
Qualité de fabrication
0
0
Signaler l'évaluation

Signaler l'évaluation