Vers le contenu des pages

Pack de guides cordes

  • Quantité livrée: 2 pièces
  • Douilles d'espacement: 1x 2,5 mm et 1x 5 mm
  • Finition: Chromé
  • Fabriqué au Japon
  • Référencé depuis Janvier 2024
  • Numéro d'article 565680
  • Conditionnement (UVC) 1 Pièce(s)
3,85 €
Tous les prix TVA incl. (TTC)
Disponible immédiatement
1

7 Évaluations des clients

4 / 5

Qualité de fabrication

5 Commentaires

google translate gb
Une erreur est malheureusement survenue, veuillez réessayer ultérieurement svp.
LP
Quality parts
Lord Porkchop 29.08.2026
I got these for a Player II tele mostly to smoothen tuning for the two highest strings, and they seem to do the job adequately. Not perfect but that's the way it is with flat headstocks.

Fender says their hardware is chrome/nickel, and compared to these string retainers I would say that their tuners and the old stock retainer were more towards nickel, whereas these are clearly chrome. Doesn't make much difference on a part of this size, but if I would do it again I'd try the nickel ones.

The quality of these Gotohs seems good. I can't feel any sharp edges with my fingers and no strings have snapped yet.

Since I wanted to use the "spacers" to raise the strings I also had to use the longer screws that they came with. Those seem to be as wide as the originals, but the threading is very slightly different. I screwed them in anyway and they seem to hold fine. Possibly there could be problems if you'd try to go back to stock hardware.
Qualité de fabrication
0
0
Signaler l'évaluation

Signaler l'évaluation

google translate gb
Une erreur est malheureusement survenue, veuillez réessayer ultérieurement svp.
a
Replacement for a HB TE-52 Telecaster
andrea00 28.06.2026
Good replacement for the original HB TE-52 String retainers. Be careful that screws are bigger and you will need to enlarge the holes. 2.5 mm drill bit recommended.
Qualité de fabrication
0
0
Signaler l'évaluation

Signaler l'évaluation

google translate de
Une erreur est malheureusement survenue, veuillez réessayer ultérieurement svp.
D
Tut was es soll
Dieter850 27.07.2025
Hab die Teile bei meinem selbstgebauten Strat-Hals verbaut. Die kleinen Schrauben halten dem Seitenzug stand und die Teile tun was sie sollen. Kaufempfehlung!
Qualité de fabrication
0
0
Signaler l'évaluation

Signaler l'évaluation

google translate de
Une erreur est malheureusement survenue, veuillez réessayer ultérieurement svp.
M
Finger weg, Schraube abgerissen!
Max_B. 13.07.2026
Trotz absolute ausreichenden Vorbohren ist die Schraube abgerissen☹️
Qualité de fabrication
0
0
Signaler l'évaluation

Signaler l'évaluation