Vers le contenu des pages

Graph Tech Black TUSQ XL PU-6520-00 Nut

5.0 étoiles sur 5 d'après 4 évaluations clients

Sillet de tête pour guitare électrique

  • Convient aux guitares avec sillet bloquant style IBZ
  • En Tusq XL noir
  • Avec encoches
  • Fond plat
  • Conçu pour un rayon de touche de 16"
  • Espacement total des cordes: 36,4 mm
  • Dimensions (L x l x H): 42,82 x 15,47 x 8,15 mm
  • Couleur: Noir

Remarque: tous les sillets de tête et de chevalet Graph Tech sont légèrement plus longs et plus larges pour assurer un ajustement parfait sur l'instrument. Le matériau en excès peut être facilement enlevé avec du papier abrasif fin.

  • Référencé depuis Juin 2024
  • Numéro d'article 592828
  • Conditionnement (UVC) 1 Pièce(s)
  • Largeur en mm 43 mm
  • Non travaillé Non
  • Domaine d'application Guitare électrique
34 €
Tous les prix TVA incl. (TTC)
Disponible immédiatement
Disponible immédiatement

Cet article est disponible en stock et peut être envoyé immédiatement.

Informations sur l'expédition
1

4 Évaluations des clients

5 / 5

Vous devez être connecté afin de pouvoir évaluer un produit.

Note: Afin d’éviter que les évaluations de notre site soient polluées par des “ouï.dire”, des approximations ou encore de la publicité clandestine, nous autorisons uniquement nos clients à évaluer les produits achetés chez nous.

Une fois connecté, vous trouverez dans votre compte client, via le lien "Évaluer des produits", tous les articles que vous pouvez évaluer.

Qualité de fabrication

4 Commentaires

google translate gb
Une erreur est malheureusement survenue, veuillez réessayer ultérieurement svp.
B6
Small But Powerful
BurgerSauce 666 25.04.2025
I got by for years using an old Jackson Dinky with a locking tremolo that I had no interest in using, so I just left off the nut locking pieces, did a half ass job of blocking the tremolo with some wood, and just used it, but man it sucked in terms of staying in tune! I liked a lot of things about the guitar but that was driving me mad to the point of being ready to abandon it.

I realised how much I liked it though so decided to have one more go at sorting it out- learned how to set up the bridge properly, and did a proper (better anyway) job blocking it with some metal brackets. Still though the metal nut sucked. I thought I'd have to go to a luthier to get something to replace it made up, but then stumbled across this piece of wizardry.

It's amazing. It's like a new guitar, wish Id done this years ago! Can now take a beating and stay in tune. The way it forms a funnel for the string, wide towards headstock and narrow towards the neck works great to tame strings to sit properly on a guitar with a silly headstock like the reversed hockey stick on mine. And it resonates like crazy too. They advertise that it does that but I was still surprised by how much. I had to tape the tremolo springs to stop them buzzing which had never happened before.

If you are using with a reverse hocky stick headstock I recommend drilling through and using screws to fix it like you would a metal locking nut. You can drill through this material no problem and the strength of glue you would need to stop the e string pulling the nut upwards on a reverse hockey guitar is probably not advisable for a nut - you might want to take it off again at some point.
Qualité de fabrication
0
0
Signaler l'évaluation

Signaler l'évaluation